IT has got to be the most outlandish military project the Pentagon has ever dreamed up. In just four years, and with $50 million, they plan to create a wearable, self-propelled robotic suit that responds to-and amplifies-your every movement. Strap themselves in and troops will be able to run faster, jump higher, leap further, and drape themselves in awesome amounts of armour and high-calibre weaponry. It will turn your average GI into a heavyweight fighting machine with superhuman powers-a kind of Tank Girl meets the Six-Million Dollar Man.
Despite the military slant, researchers on the project say it鈥檚 far more than simply toys for the boys. They predict major civilian spin-offs for workers in construction, mining and heavy industries. Exoskeletons, the proper name for these mechanical suits, could help firefighters cut victims from wrecked buildings or vehicles far faster than they can right now, and give disabled people new-found mobility-perhaps even put a motorised spring in their step.
But if the machine isn鈥檛 going to grind to a halt at the first drop of rain, or shoot out of control like a runaway bulldozer, researchers need to develop a host of new technologies to satisfy their needs. They will have to design a strong but figure-hugging frame of metal or composite materials with joints that move in three dimensions. Triggered by motion sensors attached to arms and feet, small servomotors will allow the exoskeleton to respond to your every move (see Diagram). 鈥淭his isn鈥檛 a kit we鈥檙e putting together,鈥� says Stephen Jacobsen of Sarcos, the Salt Lake City firm managing much of the project for the Pentagon鈥檚 Defense Advanced Research Projects Agency. 鈥淲e鈥檙e like a baby in the forest on this, starting at the very beginning.鈥�
Advertisement
Which is why DARPA project manager Ephrahim Garcia, an expert in smart materials hailing from Vanderbilt University in Tennessee, is casting his net wide. Garcia has been kept very busy harnessing the skills of a disparate bunch of US universities and high-tech companies to make the exo happen.FIG-mg23164701.jpg
They face a rough ride. The history of powered exoskeletons is an unhappy one. The idea was first tried in New York state in 1968, when the American electronics giant General Electric in Schenectady, with aeronautical engineers at Cornell University in Ithaca, began developing a metal monster of an exoskeleton called Hardiman. Picture Sigourney Weaver鈥檚 exoskeleton from Aliens, except with bridge girders, and you get the idea. GE got as far as demonstrating one arm of the beast, which made lifting 700 kilograms feel like 20 kilos. 鈥淗ardiman was an interesting system, way ahead of its time,鈥� says Garcia. 鈥淏ut it was a massive machine that would have required a small room load of generators and hydraulic pumps to make it function.鈥� It probably couldn鈥檛 have worked in the field autonomously.
In 1988, researchers at Los Alamos National Laboratory in New Mexico designed what they dubbed a Powered Exoskeletal Suit for the Infantryman, or PITMAN-inspired by Robert Heinlein鈥檚 1959 sci-fi tale Starship Troopers. But PITMAN remained on the drawing board, crippled-like other early ideas-by the lack of a power source to drive its joints.
Garcia and his bosses at the defence department now believe that technology has moved on sufficiently to make the concept a reality. In particular, new lightweight composite materials and advances in microelectromechanical engineering mean that it鈥檚 now possible to build small engines that are far more fuel efficient than older designs. 鈥淭he time has come when we can fuel inject, or control the fuel burn, in microscopic quantities,鈥� says Garcia.
Initially, the developers at DARPA are aiming for an exoskeleton that lets troops jog along effortlessly at 13 kilometres per hour carrying a 70-kilogram load for 12 hours at a stretch. Its superstrong framework, they believe, will support the weight of extra firepower and armour, plus the skeleton鈥檚 own weight-another 20 kilograms at least. That way, the theory runs, troops will conserve their own energy, and boost their staying power on the battlefield.
But as researchers have discovered in the past, the cornerstone of any exoskeleton is an efficient, light and reliable source of power. Without that, there鈥檚 no exo. 鈥淭he long pole in the tent is definitely the energy storage-that鈥檚 the big question right now,鈥� says Robert Martinage, an analyst at Washington DC based think tank the Center for Strategic and Budgetary Assessments.
So what sort of power do you actually need to improve upon a person鈥檚 walking speed and lifting power? 鈥淎 human walking about requires about 100 watts,鈥� says Garcia, 鈥渟o we need hundreds of watts at the minimum, but probably 1 or 2 kilowatts.鈥�
That power requirement-equivalent to trying to power one or two bars of an electric fire from a portable power pack-makes batteries a non-starter. You may be able to demonstrate an exoskeleton with batteries, says Garcia, but you鈥檒l never be able to build anything of any use. Researchers at Sarcos have calculated that an all-electric exoskeleton with batteries and motors would weigh an absurd 1800 kilograms.
Petrol power
After toying with a variety of fuels, Garcia鈥檚 team believe old-fashioned hydrocarbons win hands down. Rather than using one large engine, the researchers think it might be better to dot small combustion engines around the exoskeleton. The problem will be persuading these small motors to provide precisely controlled amounts of power to move the exoskeleton鈥檚 limbs.
Garcia鈥檚 researchers are pursuing one promising idea-merging the fuel combustor and the limb actuator into one device. You might be able to do this with state-of-the-art microelectromechanical gadgets. Made from smart materials such as shape memory alloys, these tiny devices can be used to throttle minuscule volumes of fuel into a combustor, says Garcia.
To get a cross between a working power source and an actuator, Garcia鈥檚 high-tech contractors are racing each other to come up with the best design. In one variant, researchers at engineering company Arthur D. Little in Cambridge, Massachusetts, are working on a 鈥減ower piston鈥� for the exo which captures the combustion energy in a spring so it can be released slowly and smoothly.
Their system uses a spark to combust a hydrocarbon fuel, driving a piston down a chamber. By squeezing a hydraulic fluid, the piston stores its energy in a powerful spring held in a neighbouring chamber. The idea is that when required, the spring uncoils, transferring its energy back to the hydraulic fluid which, via a series of valves, provides seamless movement for the exo.
Roberto Pellizzari, until recently manager of the project at ADL, says that tests are due to start soon on a prototype power piston the size of a cola can. Ultimately, the aim is to have the exoskeleton run on JP-8, the military鈥檚 all-purpose fuel which can burn in anything from a camp stove to a jet fighter.
Garcia also has Quoin, a firm in Ridgecrest, California, exploring other approaches to powering the exo. This company-which is also developing parts for the proposed US ballistic missile defence system-not only plans to generate exoskeleton motion with a novel miniature turbine, but also hopes to develop an electricity supply for the copious electronic sensing, imaging and communications systems that a battle-ready suit would need.
Quoin鈥檚 generator uses dual pistons that are connected to a reciprocating rod which moves back and forth. The rod is surrounded by a metal coil and as the rod moves, a small magnet on it induces an alternating current in the coil. This could power sensors or other electronics mounted on the suit.
Beyond the motors and energy source, the next problem is the pesky human body. Where, for example, do you put the actuators to best support the human gait? And how can you design the suit to be adjustable for people of different heights and weights?
No one knows all the answers yet. But Boston Dynamics, spin-off from MIT鈥檚 Leg Lab, is trying to find the answers with predictive modelling and computer visualisation. They鈥檙e simulating combined exoskeleton and human limb motion so that when they build a prototype, the motors can drive it in smooth, seamless motion.
Meanwhile, mechanical engineer William Durfee and his team at the University of Minnesota in Minneapolis are developing what鈥檚 called the exo鈥檚 鈥渟oft tissue interfaces鈥�-the bits that attach the person to the machine. Unlike leg braces, for example, which attach via clamps or bone screws, the exo will have to be strapped or zipped on, with fittings that somehow minimise the loading on skin and muscle.
They鈥檙e aiming for the coupling arrangement to be 鈥渓ike a well-fitting shoe鈥�, says Durfee. But as they move, wearers of the system will only feel it gently touching them, as it will be set up to 鈥渨alk like you walk, in synchrony鈥�, says Jacobsen.
Doing some of the legwork, quite literally, is Homi Kazerooni. He鈥檚 a veteran of many walking robot projects at the Human Engineering Lab he runs at the University of California at Berkeley.
Kazerooni鈥檚 team became involved because they鈥檝e already built LEE-a lower extremity enhancer. It鈥檚 basically a pair of powered, wearable legs for an exoskeleton. Unfortunately, the lack of a decent power source is all too obvious. LEE is driven by a noisy, heavy, exhaust-guffing chainsaw engine the wearer totes around in a bulky backpack. Shackle your boots into LEE鈥檚 feet and you can trot around fairly happily-as long as the engine is running. Switch the power off and you just fall over.
Garcia expects a lot more than this crude technology for his $50 million. 鈥淚 want to distance the exoskeleton project from that [LEE] rig. It has a limited cyclical walking motion that doesn鈥檛 sense your motion and try to help you,鈥� he says. But it鈥檚 early days, and the Berkeley team are confident they will be able to create more complex legs that squat, bend, swing from side to side, twist, walk and run. At the same time, other researchers at Sarcos and at Oak Ridge National Labs in Tennessee are developing the suit鈥檚 top half. And to support the weight of whatever weapon or rescue equipment the wearer is toting, the suit will need the mechanical equivalent of hands-in this case, probably some kind of metal grippers.
With a complete exoskeleton frame and the motors to drive it, the only thing you need now is the sensing system that lets you tell the exoskeleton when to lift an arm or jump a ditch. This is going to come from a novel touch-based, 鈥渉aptic鈥� control system that will sense what the exo-wearer wants to do and move accordingly.
Each limb of the exoskeleton will be equipped with an array of motion sensors that are in contact with the wearer鈥檚 body. Once they detect slight movement in an arm or leg, for instance, the sensors will signal the haptic control system to switch on motors that move the exoskeleton鈥檚 arm or leg to match. This will have to be done seamlessly, without hindering any activity. These haptics will also have to feed back an authentic lifting sensation to the user so they don鈥檛 apply too much force and damage whatever they鈥檙e lifting-or the exoskeleton itself.
Simple haptic control systems are already in place in the car manufacturing industry. On the production line, workers use hand-held controllers to manipulate items such as windscreens with a robotic arm. These controllers even give the users some mechanical feedback-letting them know how much force they鈥檙e applying to help them manoeuvre the objects into place. But how they鈥檙e going to adapt such simple systems for a much more complex exoskeleton is unclear. And even if it were, DARPA has applied a minor league news blackout on new exo developments. 鈥淲e tend to get burnt if we promise too much in advance,鈥� says DARPA spokesperson Jan Walker. The researchers are optimistic, however. 鈥淭his is the first time we鈥檝e ever had a coordinated team effort,鈥� says Garcia.
They plan to have a prototype working by around 2004. If it works as they hope, the suit could eventually be capable of working for 18 hours and carrying a 140-kilogram load, says Jacobsen. 鈥淓xoskeletons could help people out in all sorts of emergency arenas,鈥� predicts Louis Piscitelle, a researcher at the US Army鈥檚 Soldier Systems Center in Natick, Massachusetts. In a nuclear accident, for example, an exoskeleton could carry a huge weight of lead shielding, giving the engineer who dons it more time to tackle dangerous spills without exposing themselves to a fatal dose of radiation. It could even be given a degree of autonomy-so that should its wearer be injured, the suit could simply stroll to the nearest first aid post.
Yet the machines themselves aren鈥檛 risk-free. Heading into a burning building or onto a battlefield strapped inside an exoskeleton loaded with highly flammable fuel is going to take some guts. 鈥淚f the fuel is alcohol-based, it will easily burn,鈥� says Keijiro Yamamoto of Kanagawa University in Japan, who is developing a compressed-air powered exoskeleton (快猫短视频, 28 July, p 22). And since you鈥檒l be locked into the suit, major malfunctions could easily be fatal. In fact GE鈥檚 Hardiman was never turned on 鈥渇or fear of what it might have done to the poor guy inside鈥�, says Garcia.
Climbing into one of these mean machines is sure to convert you from a wimp to an invincible giant. But just remember: stay away from naked flames, weak bridges and large magnets. And if your nose begins to itch, whatever you do, don鈥檛 scratch it. You may never see it again.